Customer care No :+91-9999928993

Selected:

2000 LPH Industrial RO Plant

2000 LPH Industrial RO Plant

Owing to the efforts of our skilled professionals, we have been constantly engaged in offering a qualitative assortment of 2000 LPH RO Plant.

SKU: IROP2000 Category:

Description

2000 LPH TECHNICAL SPECIFICATIONS

1. RAW WATER PUMP
Purpose To feed the Dual Media Filter.
Specifications a) MOC : CI
b) Type : Horizontal Centrifugal
c) Power Required: 1.5 HP
d) Electrical : 230 V, Single phase , 50 hz
e) Make : CRI OR CROMPTON GREAVES
i) Quantity : 1 No.

2. DUAL MEDIA FILTER
Purpose To remove the total suspended solids, dirt , iron and reduce silt density index which can foul the membranes
Specifications Vessel :
a) Make: Seaflo or Equilent
b) Material of Construction: FRP

c) Diameter: 16”

d) Height : 65”
e) Testing Pressure : 10 kg/cm2
f) Opening : Top
g) Quantity : 1 No.
Valve : 11/2”

3. ACTIVATED CARBON FILTER
Purpose To remove the total color, smell, odur, from the water.
Specifications Vessel:
a) Make: Seaflo or Equilent
b) Material of Construction: FRP

c) Diameter: 16”

d) Height: 65”
e) Testing Pressure: 10 kg/cm2
f) Opening: Top
g) Quantity: 1 No.
Valve : 11/2”

4. DOSING SYSTEM
Purpose To dose antiscalant chemical to protect the scaling formation on RO membranes.
Specifications a) MOC: PP
b) Capacity: 5 LPH
c) Pressure: 7 Bar
d) Qty.: 1 No.
e) EDOSE or Idose

5. MICRON FILTER
Purpose To remove the fine particles up to 05 microns and reduce silt density index levels to acceptable level.
Specifications Cartridge Filter & Housing
Housing:
a) MOC of Housing: PP
b) Length : 20”
c) Diameter: 6.5”
d) Quantity : 2 No.
Cartridge :
e) Make : Seaflo
f) Cartridge MOC : Polypropylene
g) Length: 20”
h) Diameter : 4.5”
i) Quantity: 2 no.
k) Micron rating: 05 micron

6. HIGH-PRESSURE PUMP
Purpose To feed the Reverse Osmosis Membrane at pressure more than the osmotic pressure taking into consideration flux rate, flow and recovery.
Specifications a) MOC : Stainless Steel
b) Type : Vertical Multistage
e) Power Required: 3HP
f) Electrical: 230 V , Single phase, 50 Hz
h) Make: CRI or , CROMPTON GREAVES

7. RO MEMBRANE
Purpose To remove the major part of TDS up to 98% by Reverse Osmosis Membranes arranged and designed to give adequate flow and recovery.
Specifications a) Type: Spiral Wounded
b) Diameter of Membrane: 8.0 inch
c) Length of Membranes: 1 Mt.
d) No. of Membranes : 2
f) Salt Rejection per Membrane: 98-99%
g) Make of Membranes: CSM
h) System Recovery: 50-70 %

8. RO PRESSURE TUBE
Purpose To pack Reverse Osmosis Membranes and operate at high pressure up to 300 psi
Specifications a)stainless steel or FRP
b) Diameter of Pressure Vessel : 8.2 inch
c) Length of Pressure Vessel : 2.0 m
d) No. Pressure Vessels: 1
e) No. of Membrane per Vessel: 2
f) Make: Seaflo Or Equilent
g) Position: Horizontal, Series
h) Arrays: 1 No.

9. Panel Electrical
Purpose A control panel is provided as a safety measure for the pumps & other electrical items.

10. INSTRUMENTATION
Purpose a) Flow Meter : To measure the online flow of water
b) Low Pressure Switch : To protect RO pump from dry running
c) High Pressure Switch : To protect RO pump from back pressure
e) Pressure Gauges : For calculate ^P for each unit in RO system
Specifications Rota Meter :
Quantity : 2 Nos.( permeate & reject line)
Range : 3000 ltr per hour

Pressure Switch :
Quantity : 1 No.(Low & High)
Range : 0-450 psi

11. PLUMBING & FITTINGS
a) Valves, pipelines RO module is in UPVC
b) The System will be on common SS base frame

Reviews

There are no reviews yet.

Be the first to review “2000 LPH Industrial RO Plant”

Your email address will not be published. Required fields are marked *

Close Menu
×
×

Cart

WhatsApp WhatsApp us